WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100 Revision C
Product Description General Specifications 17
Confidential
1.4 General Specifications
1.4.1 Electrical Specifications
Primary power input
Note : If the printer is not operated for more than three minutes, it goes into sleep mode within
five minutes.
1.4.2 Environmental Conditions
Note *1: The combined Temperature and Humidity conditions must be within the blue-shaded
range in Figure 1-3.
*2: No condensation
*3: Non-operating with unpacked.
*4: Must be less than 1 month under 40°C.
Figure 1-3. Temperature/Humidity Range
Table 1-9. Primary Power Specifications
Item 100-120V model 220-240V model
Rated power supply voltage 100 to 120 VAC 220 to 240 VAC
Input voltage range 90 to 132 VAC 198 to 264 VAC
Rated current 0.7 A (max. 1.5 A) 0.4 A (max. 0.6 A)
Rated frequency 50 to 60 Hz
Input frequency range 49.5 to 60.5 Hz
Insulation resistance AC1000Vrms (for one minute)
Energy conservation International Energy Star Program compliant
Power
consumption
Printing Approx. 26 W Approx. 26 W
Sleep mode Approx. 1.3 W Approx. 1.7 W
Standby mode (power-off) Approx. 0.2 W Approx. 0.4 W
Table 1-10. Environmental Conditions
Condition Temperature
*1
Humidity
*1,2
Shock Vibration
Operating
10 to 35°C
(50 to 95°F)
20
to 80%
1G
(1 msec. or less)
0.15G,
10 to 55Hz
Storage*
3
(unpacked)
-20 to 40°C*
4
(-4°F to 104°F)
5
to 85%
2G
(2 msec. or less)
0.50G,
10 to 55Hz
When returning the repaired printer to the customer, make sure
the Printhead is covered with the cap and the ink cartridge is
installed.
If the Printhead is not covered with the cap when the printer is off,
turn on the printer with the ink cartridge installed, make sure the
Printhead is covered with the cap, and then turn the printer off.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
