Epson WorkForce 1100 - Page 82

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100 Revision C
Disassembly And Assembly Disassembling the Printer Mechanism 82
Confidential
7. Release the hook and two tabs of the Cable Holder, and remove the Cable Holder.
Figure 4-41. Removing the CSIC Assy (1)
C H E C K
P O I N T
The Hinge, Cover Cartridge can not be removed without damaging
it. Whenever replacing the Printhead, the Hinge, Cover Cartridge
must be also replaced with a new one.
Figure 4-39. Hinge, Cover Cartridge
Engage the two dowels of the Ink Cartridge Cover with the
installation holes on the Carriage Unit and Hinge, Cover Cartridge
(one each).
Figure 4-40. Reinstalling the Ink Cartridge Cover
Hinge, Cover
Cartridge
Dowels
Ink Cartridge Cover
Installation holes
Cable Holder
Hook
Tabs