Epson WorkForce Pro WF-M5399 - Sending Email Notifications

189
Related tasks
Configuring SSL/TLS Settings
Importing a CA Certificate
Accessing the Web Config Utility
Email Server Settings
You can configure these email server settings in Web Config.
Setting Options/Description
Authentication Method Select the authentication method that matches your email
server
Authenticated Account Enter the authenticated account name from 1 to 255
characters long in ASCII
Authenticated Password Enter the authenticated password from 1 to 20 characters long
in ASCII using A-Z, a-z, 0-9, and these characters:
! # $ % ' * + - . / = ? ^ _ { ! } ~ @
Sender's Email Address Enter the sender's email address from 1 to 255 characters
long in ASCII; do not use a period (.) as the first character or
use these characters: ( ) < > [ ] ;
SMTP Server Address Enter the SMTP server address from 1 to 255 characters long
using A-Z, a-z, 0-9, and "-" in IPv4 or FQDN format
SMTP Server Port Number Enter the SMTP server port number between 1 and 65535
POP3 Server Address Enter the POP server address from 1 to 255 characters long
using A-Z, a-z, 0-9, and "-" in IPv4 or FQDN format
POP3 Server Port Number Enter the POP server port number between 1 and 65535
Parent topic: Configuring an Email Server
Sending Email Notifications
You can set up email notifications that will be sent when an event occurs on the product. You can
register up to five destinations.
Note: You must have configured a mail server before setting up notifications.