21
11. Place the correct sticker on each cassette unit to indicate the cassette number.
12. Connect the power cord and other connection cables, then plug in the product.
13. Turn on the product.
14. Press the Paper Setting button and make sure the installed cassette units are displayed on the
screen.
15. Enable the optional paper cassette units in the printer software.
Enabling the Optional Paper Cassettes - Windows
Enabling the Optional Paper Cassettes - PostScript Printer Software - Windows
Enabling the Optional Paper Cassettes - Mac
Enabling the Optional Paper Cassettes - PostScript Printer Software - Mac
Parent topic: Installing or Using Optional Parts
Enabling the Optional Paper Cassettes - Windows
You need to enable the optional paper cassette units before you can use them with the printer software.
Note: If you are using the PCL driver or PostScript (PS3) printer software, see the link below to enable
the optional cassette units.
To Next Page
Loading...
