215
Related references
IEEE 802.1X Network Settings
IEEE 802.1X Network Status
Related tasks
Configuring a Certificate for an IEEE 802.1X Network
IEEE 802.1X Network Settings
You can configure these IEEE 802.1X network settings in Web Config.
Setting Options/Description
IEEE802.1X (Wired LAN) Enable or disable settings (IEEE802.1X > Basic)
IEEE802.1X (Wi-Fi) Displays the IEEE802.1X (Wi-Fi) connection status
Connection Method Displays the current network connection method
EAP Type Select one of these authentication methods for connections
between the product and a RADIUS server:
EAP-TLS or PEAP-TLS: You must obtain and import a CA-
signed certificate
PEAP/MSCHAPv2 or EAP-TTLS: You must configure a
password
User ID Enter an ID between 1 and 128 ASCII characters for
authentication on a RADIUS server
Password Enter a password between 1 and 128 ASCII characters for
authentication of the product. If you are using Windows as a
RADIUS server, enter up to 127 ASCII characters.
Confirm Password Enter the authentication password again
Server ID Enter a server ID between 1 and 128 ASCII characters for
authentication on a specified RADIUS server; server ID is
verified in the subject/subjectAltName field of a server
certificate sent from the RADIUS server
Certificate Validation Select a valid certificate regardless of the authentication
method; import the certificate using the CA Certificate option
To Next Page
Loading...
