Epson WorkForce WF-2870 Series User Manual

Related Information
& “Placing Originals” on page 58
Setting Up a WSD Port
is
section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
e following is necessary to set up a WSD port.
❏
e
printer and the computer are connected to the network.
❏ e printer driver is installed on the computer.
1.
Tur n the printer on.
2.
Click start, and then click Network on the computer.
3.
Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
Click Uninstall and start again if the Uninstall screen is displayed.
Note:
e printer name you set on the network and model name (EPSON XXXXXX (XX-XXXX)) are displayed on the
network screen. You can check the printer's name set on the network from the printer's control panel or by printing a
network status sheet.
Scanning > Scanning Using the Control Panel > Scanning Using WSD
129

Epson WorkForce WF-2870 Series Specifications

General

Print Technology	Inkjet
Print Speed (Color)	5 ppm
Paper Capacity	100 sheets
Automatic Document Feeder	Yes, 30 sheets
Printer Type	All-in-One
Functions	Print, Copy, Scan, Fax
Print Speed (Black)	10 ppm
Connectivity	Wi-Fi, Wi-Fi Direct, USB, Ethernet
Mobile Printing	Apple AirPrint, Google Cloud Print
Display	2.4" LCD
Paper Sizes Supported	Letter, Legal, A4, A6, B5, Envelopes
Ink Cartridges	Black, Cyan, Magenta, Yellow
Dimensions (W x D x H)	14.8" x 9.5"