Related Information
& “Checking the Printer Status” on page 187
& “Removing Jammed Paper” on page 189
Pages are Blank or only a Small Amount of Text is Printed on the
Second Page in Received Faxes
You can print on one page by using the Delete Print Data Aer Split feature in Split Page Settings.
Select Delete Top or Delete Bottom in Delete Print Data
Aer
Split, and then adjust
reshold
. Increasing the
threshold increases the amount deleted; a higher threshold gives you a higher possibility of printing on one page.
Related Information
& “Receive Settings Menu” on page 85
Other Faxing Problems
Cannot Make Calls on the Connected Telephone
Connect the telephone to the EXT. port on the printer, and pick up the receiver. If you cannot hear a dial tone
through the receiver, connect the phone cable correctly.
Related Information
& “Connecting Your Phone Device to the Printer” on page 76
Answering Machine Cannot Answer Voice Calls
On the control panel, set the printer's Rings to Answer setting to a number higher than the number of rings for
your answering machine.
Related Information
& “Basic Settings Menu” on page 84
& “Making Settings to Use an Answering Machine” on page 81
Sender's Fax Number Not Displayed on Received Faxes or the
Number Is Wrong
e sender may not have set the fax header information or may have set it incorrectly. Contact the sender.
Solving Problems
>
Other Faxing Problems
>
Sender's Fax Number Not Displayed on Received Faxes or the Num
…
223
To Next Page
Loading...
Need help?
General
