EasyManua.ls Logo

Epson WorkForce WF-2870 Series - Placing Originals on the ADF

Epson WorkForce WF-2870 Series
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Loading Capacity A4, Letter: 30 sheets or 3.3 mm
8.5x13 in., Legal: 10 sheets
Even when the original meets the specications for media that can be placed in the ADF, it may not feed from the
ADF or the scan quality may decline depending on the paper properties or quality.
c
Important:
Do not feed photographs or valuable original artwork into the ADF. Misfeeding may wrinkle or damage the
original. Scan these documents on the scanner glass instead.
To prevent paper jams, avoid placing the following originals in the ADF. For these types, use the scanner glass.
Originals that are torn, folded, wrinkled, deteriorated, or curled
Originals with binder holes
Originals held together with tape, staples, paper clips etc.
Originals that have stickers or labels stuck to them
Originals that are cut irregularly or not right angled
Originals that are bound
OHPs, thermal transfer paper, or carbon backs
Placing Originals on the ADF
1.
Align the edges of the originals.
2.
Open the ADF input tray.
Preparing the Printer
>
Placing Originals
>
Placing Originals on the ADF
59

Table of Contents

Related product manuals