3.
Slide out the ADF edge guide.
4.
Place the originals face-up and short edge
rst
in the ADF, and then slide the ADF edge guide to the edge of
the originals.
c
Important:
❏ Do not load originals above the line indicated by the triangle symbol on the ADF.
❏ Do not add originals while scanning.
Placing Originals on the ADF for 2-up Copying
Place the originals in the direction shown in the illustration, and then select the orientation setting.
Preparing the Printer
>
Placing Originals
>
Placing Originals on the ADF
60
To Next Page
Loading...
