Epson WorkForce WF-2870 Series - Faxing; Before Using Fax Features; Sending Faxes Using the Printer; Sending Faxes Using the Control Panel

Faxing
Before Using Fax Features
Check the following before you start using the fax features.
❏ e printer and the phone line, and (if necessary) the phone machine are connected correctly
❏ Fax basic settings (Fax Setting Wizard) is complete
❏ Other necessary Fax Settings are complete
See "Related Information" below to make settings.
Related Information
& “Fax Settings” on page 74
Sending Faxes Using the Printer
Sending Faxes Using the Control Panel
Related Information
& “Sending Faxes Automatically Using the Control Panel” on page 139
Sending Faxes Automatically Using the Control Panel
You can send faxes by entering fax numbers for recipients on the control panel.
1.
Place the originals.
You can send up to 100 pages in one transmission; however depending on the remaining amount of memory,
you may not be able to send faxes even with less than 100 pages.
Faxing > Sending Faxes Using the Printer > Sending Faxes Using the Control Panel
139