Epson WorkForce WF-2870 Series - Loading Envelopes and Precautions

Note:
Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may
decline.
Related Information
& “Paper Handling Precautions” on page 54
& “Available Paper and Capacities” on page 52
& “Loading Envelopes and Precautions” on page 57
& “Loading Long Papers” on page 58
Loading Envelopes and Precautions
Loading envelopes short edge
rst
at the center with the
ap
facing down, and slide the edge guides to the edges of
the envelopes.
❏ Fan and align the edges of the envelopes before loading. When the stacked envelopes are pued up with air,
press them down to atten them before loading.
❏ Do not use envelopes that are curled or folded. Using these envelopes causes paper jams and smears on the
printout.
❏ Do not use envelopes with adhesive surfaces on the
aps
or window envelopes.
❏ Avoid using envelopes that are too thin, as they may curl during printing.
Related Information
& “Available Paper and Capacities” on page 52
& “Loading Paper in the Rear Paper Feed” on page 55
Preparing the Printer > Loading Papers > Loading Envelopes and Precautions
57