Epson WorkForce WF-2870 Series User Manual

❏ Pre-punched paper
Note:
❏ Load a single sheet of dened size plain paper with binding holes at the le or right.
❏ Adjust the print position of your le to avoid printing over the holes.
❏ Automatic 2-sided printing is not available for pre-punched paper.
4.
Slide the edge guides to the edges of the paper.
5.
On the control panel, set the size and type of the paper you loaded in the rear paper feed.
To select an item, use the
u d l r buttons, and then press the OK button.
Note:
❏ You can also display the paper size and paper type settings screen by selecting Settings > General Settings > Printer
Settings > Paper Source Settings > Paper Setting.
❏ For letterhead paper, select Letterhead as the paper type.
❏ For letterhead paper, if you print on paper that is smaller than the setting in the printer driver, the printer may print
beyond the edges of the paper which can lead to ink smears on your printouts and excess ink building up inside the
printer. Make sure you select the correct paper size setting.
❏ 2-sided printing and borderless printing are not available for letterhead paper. Also, the print speed may be slower.
6.
Slide out the output tray.
Preparing the Printer > Loading Papers > Loading Paper in the Rear Paper Feed
56

Epson WorkForce WF-2870 Series Specifications

General

Print Technology	Inkjet
Print Speed (Color)	5 ppm
Paper Capacity	100 sheets
Automatic Document Feeder	Yes, 30 sheets
Printer Type	All-in-One
Functions	Print, Copy, Scan, Fax
Print Speed (Black)	10 ppm
Connectivity	Wi-Fi, Wi-Fi Direct, USB, Ethernet
Mobile Printing	Apple AirPrint, Google Cloud Print
Display	2.4" LCD
Paper Sizes Supported	Letter, Legal, A4, A6, B5, Envelopes
Ink Cartridges	Black, Cyan, Magenta, Yellow
Dimensions (W x D x H)	14.8" x 9.5"