Epson WorkForce WF-2870 Series User Manual

1.
Select
on the home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
2.
Select Wi-Fi (Recommended).
3.
Press the OK button.
If the network connection is already set up, the connection details are displayed. Select Change Settings to
change the settings.
4.
Select Others > PIN Code Setup (WPS).
5.
Use your computer to enter the PIN code (an eight digit number) displayed on the printer's control panel into
the wireless router within two minutes.
Note:
See the documentation provided with your wireless router for details on entering a PIN code.
6.
Press the OK button on the printer.
7.
Close the screen.
e screen automatically closes aer a specic length of time.
Note:
If connection fails, restart the wireless router, move it closer to the printer, and try again. If it still does not work, print a
connection report and check the solution.
8.
Press the
button.
Related Information
& “Checking the Network Connection Status” on page 39
& “When You Cannot Make Network Settings” on page 201
Network Settings > Making Wi-Fi Settings from the Printer > Making Wi-Fi Settings by PIN Code Setup (WPS)
37

Epson WorkForce WF-2870 Series Specifications

General

Print Technology	Inkjet
Print Speed (Color)	5 ppm
Paper Capacity	100 sheets
Automatic Document Feeder	Yes, 30 sheets
Printer Type	All-in-One
Functions	Print, Copy, Scan, Fax
Print Speed (Black)	10 ppm
Connectivity	Wi-Fi, Wi-Fi Direct, USB, Ethernet
Mobile Printing	Apple AirPrint, Google Cloud Print
Display	2.4" LCD
Paper Sizes Supported	Letter, Legal, A4, A6, B5, Envelopes
Ink Cartridges	Black, Cyan, Magenta, Yellow
Dimensions (W x D x H)	14.8" x 9.5"