Fax Header:
You can register up to 21 sender names as necessary. You can enter up to 40 characters for each
sender name.
Receive Mode:
Select the receive mode. For details, see the related Information below.
DRD:
If you have subscribed to a distinctive ring service from your telephone company, select the ring
pattern to be used for incoming faxes. e distinctive ring service, oered by many telephone
companies (the service name diers by company), allows you to have several phone numbers on one
phone line. Each number is assigned dierent ring pattern. You can use one number for voice calls
and another for fax calls. Depending on the region, this option may be On or O.
Rings to Answer:
Select the number of rings that must occur before the printer automatically receives a fax.
Remote Receive:
Remote Receive:
When you answer an incoming fax call on a phone connected to the printer, you can start
receiving the fax by entering the code using the phone.
Start Code:
Set the start code of Remote Receive. Enter two characters using 0-9, *, #.
Rejection Fax:
Rejection Fax:
Select options to reject receiving junk faxes.
Rejection Number List:
If the other party's phone number is in the rejection number list, set whether to reject
the incoming faxes.
Fax Header Blank:
If the other party's phone number is blocked, set whether to reject receiving the faxes.
Unregistered Contacts:
If the other party's phone number is not in the contacts, set whether to reject receiving
the faxes.
Edit Blocked Number list:
You can register up to 30 fax numbers to reject the faxes and calls. Enter up to 20 characters
using 0-9, *, #, or space.
Related Information
& “Making the Printer Ready to Send and Receive Faxes” on page 71
& “Making Settings for a PBX Phone System” on page 73
Product Information
>
Settings Menu List
>
General Settings
219
To Next Page
Loading...
