Epson WorkForce WF-2960DWF - Page 220

& “Receiving Incoming Faxes” on page 86
& “Making Settings for Blocking Junk Faxes” on page 75
Send Settings
You can nd the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Send Settings
Wait Time for Next Original:
Wait Time for Next Original:
Enable this to start sending the fax
aer
you scan a document by tapping x, and then wait for
the next original until the time specied has passed.
Time
Set the time to wait for the next original.
Fax Preview Display Time:
Fax Preview Display Time:
Enable this to start sending the fax
aer
the
specied
time has passed without performing any
operations aer displaying the preview screen.
Time:
Specify the time to preview the scanned document before sending it.
Receive Settings
Related Information
& “Fax Output Settings” on page 220
& “Print Settings” on page 221
Fax Output Settings
You can nd the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Receive Settings > Fax Output Settings
Save to Inbox:
Save to Inbox:
Saves received faxes to the printer's Inbox. Up to 100 documents can be saved. Note that saving
100 documents may not be possible depending on the usage conditions such as the
le
size of
saved documents, and using of multiple fax saving features at a time.
ough
the received faxes are not automatically printed, you can view them on the printer's
screen and print only the ones you need.
Product Information > Settings Menu List > General Settings
220