Epson WorkForce WF-2960DWF - Page 221

Options when memory is full:
You can select the operation to print the received fax or refuse to receive it when the Inbox
memory is full.
Inbox Password Settings:
Password protects the Inbox to restrict users from viewing received faxes. Select Change to
change the password, and select Reset to cancel password protection. When changing or
resetting the password, you need the current password.
You cannot set a password when Options when memory is full has been set to Receive and
print faxes.
Save to Computer:
Saves received faxes as PDF les on a computer connected to the printer. You can only set this to Ye s
by using the FAX Utility (application). You cannot enable this from printer's control panel. Install the
FAX Utility on the computer in advance.
Aer
setting this to Ye s , you can change this to Ye s and
Print from the printer's control panel.
Related Information
& “Making Settings to Save Received Faxes” on page 74
Print Settings
You c a n
nd
the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Receive Settings > Print Settings
Auto Reduction:
Prints received faxes with large-size documents reduced to t on the paper in the paper source.
Reducing may not always be possible depending on the received data. If this is turned o, large
documents are printed at their original size on multiple sheets, or a blank second page may be
ejected.
Split Page Settings:
Prints received faxes with the page split when the size of the received documents is larger than the
size of the paper loaded in the printer. If the amount that exceeds the paper length is less than the
value set in Delete Print Data
Aer
Split-
reshold
, the excess is discarded. If the amount that
exceeds the paper length is over the set value, the excess is printed on another paper.
Delete Print Data After Split:
Delete Print Data After Split:
Select the area of the document to delete when the amount that exceeds the paper
length is less than the value set in reshold.
Threshold:
If the amount that exceeds the paper length is less than or equal to this value, the excess
is discarded and is not printed.
Product Information > Settings Menu List > General Settings
221