3.
Enter ‘ping xxx.xxx.xxx.xxx', and then press the Enter key.
Enter the printer's IP address for xxx.xxx.xxx.xxx.
4.
Check the communication status.
If the printer and the computer are communicating, the following message is displayed.
If the printer and the computer are not communicating, the following message is displayed.
Checking the Communication Using a Ping Command - Mac OS
You can use a Ping command to make sure the computer is connected to the printer. Follow the steps below to
check the communication using a Ping command.
Solving Problems
>
Cannot Print or Scan
>
The Printer Cannot Connect to the Network
142
To Next Page
Loading...
