1.
Check the printer's IP address for the communication that you want to check.
You can check this from the Network Status screen on the printer's control panel, a connection report, or the
IP Address column of a network status sheet.
2.
Run Network Utility.
Enter "Network Utility" in Spotlight.
3.
Click the Ping tab, enter the IP address that you checked in step 1, and then click Ping.
4.
Check the communication status.
If the printer and the computer are communicating, the following message is displayed.
Solving Problems
>
Cannot Print or Scan
>
The Printer Cannot Connect to the Network
143
To Next Page
Loading...
