Ericsson MD110 - Number Analysis; Least-Cost Routing Code; External Destination Code

LBI-39039B ADMINISTRATION AND EXAMPLE PROGRAMMING
28
/*********************************************************************************/
/* Data */
/*********************************************************************************/
RODAI:ROU=3X,TYPE=TL1,VARC=00000006,VARI=00000002,VARO=0000000D;
/*********************************************************************************/
/* Equipment */
/*********************************************************************************/
ROEQI:ROU=3X,TRU=1-1&&1-X,EQU=1-X-XX-0;
/*********************************************************************************/
/* External Destination Code */
/*********************************************************************************/
RODDI:DEST=690,ROU=3X,ADC=0005000000000250,SRT=4;
/*********************************************************************************/
/* Inbound Call Routing */
/*********************************************************************************/
RODNI:ROU=3X,DAY=5000,NIG=5000;
5.3. NUMBER ANALYSIS
The NANSI command reserves a number series within the MD110.
5.3.1. Least-Cost Routing Code
The LCR code for calls to the PSTN is typically defined as “9” in the MD110.
• Outbound radio calls prefix the Public Network number with this digit.
• MD110 extension calls to the Public Network prefix the Public Network number with this digit.
NANSI
NUMTYP LC Least-Cost Routing Code
NUMSE 9
5.3.2. External Destination Code
External destination codes are defined in the MD110.
NANSI
NUMTYP EX External Destination Code
NUMSE 0&&3&
670&&699
0-3 route calls to EDACS. 670-699 are used by LCR for
EDACS, Private Network, or Public Network call routing.