LIM CONFIGURATIONS FOR PUBLIC NETWORK CONNECTIONS LBI-39039B
47
6.2.3. Route Equipment
ROEQI
ROU 3X This information will match the entry under ROCAI.
TRU
LIM-Trunk 1-1&&1-X This information must be added to the script file. X is
a function of the number of DID channels in the T1.
EQU
LIM 1
Magazine X This information must be added to the script file.
Board position XX This information must be added to the script file.
Board Circuit No. X This information must be added to the script file. It is
a function of the DID channel position in the T1.
INDDAT
Constant 000000000
0
0 No block on excessive slip
E CCS
B8ZS
ESF
No DMI
6.3. NORTH AMERICA T1 BOTHWAY GROUND START TRUNK
With Line Clearing and Without B-Answer
The Public Network should place all Ground Start channels in the T1 into a hunt group so that inbound callers need only
remember one public number. Please refer to section 2.2 for a discussion of line clearing and B-answer supervision.
6.3.1. Route Class
ROCAI
ROU 3X This information must be added to the script
file. X will be 0-9. Make the first Public Network
route 30.
SEL
DID characteristics 0 No intercept
Incoming calls 1 Allowed
Outgoing trunk selection 1 Even load distribution
Terminal route characteristics
(outgoing)
0 Normal route
Alternate Route Selection (incoming) 0 Permitted
To Next Page
Loading...
