EasyManua.ls Logo

Ericsson MD110 - External Destination Codes; Inbound Call Routing; Private Network Lcr

Ericsson MD110
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LBI-39039B LIM CONFIGURATIONS FOR PRIVATE NETWORK CONNECTIONS
64
7.1.4. External Destination Codes
RODDI
DEST 680
ROU 2X This information will match the entry under
ROCAI.
ADC
Trunk seizure 0 Immediate
Called Number type 0 Unknown
Number series 0 Variable length
Calling Number type public 0 Unknown
Calling Number type private 5 Unknown
Network 0 Not fiber optic or TNS
Release 0 First party release
Backward signaling 0 Send from first digit
Terminating and transit seizure 0 Send terminating seizure signal
Off-hook Queuing threshold 0 No threshold
Expensive route warning tone 0 No ERWT
LCR accessibility 0 Accessible by all callers
Traveling Class Mark 0 Not sent
Return block 25 Limit on transit exchanges
PNR Number Translation Use 0 No Translation
SRT 4 Start digit for outgoing calls
7.1.5. Inbound Call Routing
The other PBX dials the DISA number for inbound calls to radios.
7.2. PRIVATE NETWORK LCR
The "8" LCR code will be initialized in the same manner as the "9" for the Public Network LCR.
The LCR tables for “8” are installation-dependent.
Radios and MD110 extensions will use "8" to access the Private Network.

Table of Contents

Other manuals for Ericsson MD110

Related product manuals