Ericsson MD110 - Analog Test Extensions; Common Class of Service Categories

LBI-39039B ADMINISTRATION AND EXAMPLE PROGRAMMING
36
5.6. ANALOG TEST EXTENSIONS
5.6.1. Common Class of Service Categories
Common Class of Service 0 is used for the MD110 test extensions.
Setting TCD or TMG to 15 results in maximum dialing privileges for the category of service.
EXCCS
CAT 0
TRAF
CAD Class 00
TCD Category Night Mode 00
TCD Category Day Mode 00
Traffic Matrix Group 00
SERV
ACD Supervisor 0 No
Emergency Switching 0 No
Intrusion 02 Reception of call waiting tone allowed
DID 1 Can be a DID extension
Automatic Callback 2 Allowed toward extensions and trunks
Call Waiting Tone 07 Permitted to send CWT
Can receive CWT from extension, operator, or DID
trunk
CDIV
Rerouting 0 Permitted on incoming calls
Do Not Disturb 0 Not allowed
External Call Forwarding 0 Not allowed
Diversion 00 All calls (Individual answer point required)
Diversion on Origin
Internal Line
Public External Line
Private External Line
0
0
0
0
Not allowed
ROC
FRL/TCM 0 Default level
Account Code 2 Never required
LCR Threshold 3 All routes allowed
Priority Routing 0 Normal extension