ESAB fabricator 141i User Manual

ESAB FABRICATOR 141i
Manual 0-5420 3-21 INSTALLATION, OPERATION AND SETUP
Screws
Securing Block
Art # A-11483
3. Open the wire compartment door and release the tension knob so the pressure arm and tension knob hang downwardly.
Art # A-11484
Pressure Arm
Tension Knob
4. Gently push the bottom of the front panel upward until the thumb screw is fully exposed.

ESAB fabricator 141i Specifications

General

Brand	ESAB
Model	fabricator 141i
Category	Welding System
Language	English