18 Wireless TimeClock Configuration Guide
Time Zone
For accurate real-time and astronomical events, the WTC must be set to
reflect your current time zone. Select the time zone based on hours offset
from Greenwich Mean Time (GMT). See greenwichmeantime.com for a com-
plete listing of GMT time zones.
1. Select Time Zone from the TimeClock Settings menu, and press
[Enter] to modify.
2. Press [Up] or [Down] to scroll the GMT time zone offset, and press
[Enter] to select.
Latitude and Longitude
Set an accurate location to properly calculate sunrise and sunset times.
1. Select Latitude from the TimeClock Settings menu, and press [Enter]
to modify.
2. Press [Up] or [Down] to scroll the degrees, and press [Enter] to select.
3. Press [Up] or [Down] to scroll the minutes, and press [Enter] to select.
4. Press [Up] or [Down] to scroll either N (North) or S (South), and press
[Enter] to select.
5. Select Longitude from the TimeClock Settings menu and repeat steps
2 through 4 above for E (East) or W (West).
Daylight Saving Time
Set the current Daylight Saving Time (DST) location to use the default Day-
light Saving Time dates for the selected location.
1. Select DST from the TimeClock Settings menu, and press [Enter] to
modify.
2. Press [Up] or [Down] to scroll to the Daylight Saving Time options
(None, US, EU, and Manual), and press [Enter] to select.
To Next Page
Loading...
