ETC Halcyon Gold - Configure the Fixture; DMX Address; Settings Menu; Set Control Options

17 Halcyon Gold User Manual
Configure the Fixture
Use the onboard user interface to configure the fixture, or use the ETC Set Light App to
wirelessly configure the fixture (see Configure the Fixture Wirelessly on page 25 for details).
Connect the fixture to power before you configure it. If you do not provide power, the fixture
will use battery power to power the user interface.
DMX Address
Navigate:Main Menu → DMX Address
Set the DMX address for the fixture.
Settings Menu
Set Control Options
Navigate:Main Menu → Settings → Control
Menu Item Options Description
DMX Mode DMX Set the control input for the fixture.
Art-Net
sACN
Data Loss Fade Set the control mode when DMX is absent.
Hold Last Look
Protocol Standard Set the DMX protocol.