25 Halcyon Gold User Manual
View Sensor Status
Navigate:Main Menu → Diagnostics → Sensors
Displays the status of the sensors, which can help you determine whether the fixture is
recognizing movement and position. The display toggles between ON and OFF as the magnet
passes the sensor.
View Temperatures
Navigate:Main Menu → Diagnostics → Temperatures
Displays the current fixture temperatures as read from the fixture head, the LED, and the
power supply in the fixture base.
View DMX Values for Channels
Navigate:Main Menu → Diagnostics → DMX Monitoring
View the DMX value of each of the fixture's channels (the parameters of the fixture). Scroll to
the parameter that you want to view (Pan, Tilt, etc.) and view the value.
View Encoder Information
Navigate:Main Menu → Diagnostics → Encoder
Displays the position data for the pan and tilt encoders, which can help you troubleshoot pan
and tilt issues.
View Software Version
Navigate:Main Menu → Diagnostics → Software Version
Displays the software version installed on the fixture.
View RDM and IP Address Information
Navigate:Main Menu → Diagnostics → Device
Displays the following for the fixture:
• RDM device label
• RDM device ID
• IP address
‐ IP address (you can modify the IP address in the Settings menu)
‐ Mask address (you can modify the subnet mask address in the Settings menu)
‐ MAC address
Configure the Fixture Wirelessly
Download the ETC Set Light app to a smartphone with NFC functionality, use
the app to set fixture parameters, and then tap the smartphone to the NFC
tag on the fixture to configure it wirelessly—even when the fixture is not
powered on.
Visit etcconnect.com/Apps or scan the code for more information about the
Set Light app.
To Next Page
Loading...
