ETC Halcyon Gold - Page 4

DMX Channels 14
Ethernet Control
15
Connect EthernetCables to a Fixture 15
Ethernet Control and DMX Thru 16
Terminate DMX
16
Set the DMX Start Address 16
Set the Control Source and Network 16
Configure the Fixture
17
DMX Address 17
Settings Menu 17
Set Control Options
17
Set Network Options
18
Set Pan and Tilt Options
19
Set Dimming Options
19
Set Fan Options
20
Set Gobo Color Correction
20
Set Units for Temperature Display
20
Set Display Options
20
Update Software
21
Set Calibration
22
Access Service Settings
22
Configure the Encoder
23
Reset Fixture to Factory Default Settings
23
Test/Home Menu 23
Reset the Mechanical Positions on the Fixture
23
Test the Fixture
23
Test an Individual Channel
23
Manually Set an Individual Channel
23
Calibrate Pan and Tilt Encoders
24
Diagnostics Menu 24
View Usage Information
24
View Fixture Errors
24
View Fan Speeds
24
View Sensor Status
25
View Temperatures
25
ii Halcyon Gold User Manual