ETC Source Four LED 3 Series - RDM Parameters; Fixture Compliance

30 Source Four LED Series 3 User Manual
RDM Parameters
Parameter Fixture Value Description
Manufacturer ID All 0x6574 Electronic Theatre Controls
Model ID S4LEDS3L, S4LEDS3LS 0x0500 ETC Source Four LEDSeries 3 Lustr
S4LEDS3D, S4LEDS3DS 0x0501 ETC Source Four LEDSeries 3 Daylight
DMX Personality All 0x00E0
1 = Direct
2 = Expanded
3 = Studio
4 = RGB
5 = 1-channel
DMXStart Address All 0x00F0 Range = 1–512
Fixture Compliance
For current and complete compliance and specifications, see the Source Four LED Series 3
datasheet at etcconnect.com.
FCC Compliance
Source Four LED Series 3
(For any FCC matters):
Electronic Theatre Controls, Inc.
3031 Pleasant View Road
Middleton, WI 53562
+1 (608) 831-4116
etcconnect.com
This device complies with Part 15 of the FCCRules. Operation is subject to the following two
conditions:(1) this device may not cause harmful interference, and (2)this device must accept
any interference received; including interference that may cause undesired operation. Visit
etcconnect.com/products for current and complete compliance information including FCC
compliance.
This device contains a wireless module with the following identification numbers:
FCC ID: VU65995