ETC Source Four LED 3 Series - Page 4

Preset Mode 20
Set Up Wireless Control
21
Set Up Multiverse Wireless Communication 21
Configure Fixtures Wirelessly Using the Set LightApp 21
Control and Customize the Display
22
Lock the Display 22
Adjust the Display Settings 22
Troubleshooting and Maintenance
23
Troubleshooting Checklist 23
Adjust the Pulse Width Modulation (PWM) 24
Test the Emitters 24
View Diagnostic Data 25
Export Fixture Data for Troubleshooting 25
Restore Default Settings 26
Update Firmware 26
Backup and Restore the Fixture Configuration 27
Store the Antenna 28
Clean the Lens and the Fixture Housing 28
Specifications and Reference
29
Environment 29
Weight 29
Electrical 29
RDM Parameters 30
Fixture Compliance 30
Licensed Software 31
ii Source Four LED Series 3 User Manual