Chapter 3 Standard Operations
> 3.3 Attaching and Removing the Front Cover
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
77
Copyright 2010 FUJITSU LIMITED
P3AM-3042-07ENZ0
■ Procedure for removing the front cover
Remove the front cover in the following order.
Procedure
1 By holding the tab of the front cover, pull the cover toward you to remove it.
End of procedure
CAUTION
Do
• When attaching the right side of the front cover, support its
left side with your left hand, to prevent it from coming loose
and falling.
Tab
To Next Page
Loading...