To perform prewash, position the wheel as
follows:
Slightly lift the squeegee by means of
the lever pos. 1;
Turn the wheel support pos. 2 in the
direction indicated by the arrow until the
lever rests on the squeegee body pos. 3;
Lower the squeegee lifting lever pos. 1;
The blades of the squeegee will be lifted
off the ground to perform prewash. (see
pos. 4).
After completing prewash, to return the
squeegee to drying conditions, return the
wheel to raised position as shown in the
picture.
To Next Page
Loading...
