Eureka E50 - Removing the Brush or Abrasive Disc

23
ADJUSTING THE MACHINE DRIVE DIRECTION
IMPORTANT: this adjustment must be made with the machine operating, full of water, with squeegee
lowered and vacuum on.
If, during operation, the machine tends to move in the direction A indicated by the arrow, adjust the knob pos.
1 by screwing it (turn clockwise) thereby loading the spring.
If, during operation, the machine tends to move in the direction B indicated by the arrow, adjust the knob pos.
1 by unscrewing it (turn anti-clockwise) thereby releasing the spring.