Eureka E50 - Default Chapter; Table of Contents

4
TABLE OF CONTENTS
Topic
PAGINA
INTRODUCTION
5
MACHINE IDENTIFICATION
5
WARNINGS
6
GENERAL WARNINGS AND RECOMMENDATIONS
6
DISPOSAL
8
TRANSPORT AND MOVEMENT
8
UNPACKING
9
BATTERIES INSTALLATION
10
MACHINE DESCRIPTION
13
PRIMARY FUNCTIONS AND CONTROLS
15
MACHINE SETTING
17
 MOUNTING THE SQUEEGEE
17
 ADJUSTING THE SQUEEGEE
18
 SQUEEGEE PREWASH WHEEL
19
 MOUNTING THE ABRASIVE DISC ONTO THE DISC PAD HOLDER
20
 BRUSHES/ABRASIVE DISC INSTALLATION
21
 ADJUSTING THE MACHINE DRIVE DIRECTION
23
 FILLING THE DETERGENT SOLUTION TANK
24
 ADJUSTING THE DETERGENT SOLUTION ON THE BRUSHES
25
USING THE MACHINE
25
 CHECK BEFORE USE
25
 DETERGENT DOSING SYSTEM (OPTIONAL)
25
 OPERATION
26
PERIODIC SERVICING
27
 DRAINING AND CLEANING THE RECOVERY TANK
27
 RECOVERY TANK DRAIN VALVE CLEANING
28
 DRAINING AND CLEANING THE SOLUTION TANK
29
 CHECHING BRUSHES OR ABRASIVE DISCS
29
 CLEANING THE DETERGENT SOLUTION FILTER
30
 CHECKING THE SQUEEGEE GAS SPRING AND BUSHES
30
 CLEANING, REPLACING AND CHECKING THE INSTALLATION OF THE SQUEEGEE BLADES
31
 CHECKING THE BRUSH PLATE SPLASHGUARD
33
 CHECKING OR REPLACING FUSES
33
 CHECKING THE SEAL ON THE COVER
35
 RECHARGING BATTERIES
35
 CLEAN THE COOLING GRID OF THE VACUUM MOTOR
36
MAINTENANCE SCHEDULE
36
SERVICING AND MAINTENANCE FOR SCHEDULED SERVICING
37
DIMENSIONAL TECHNICAL DRAWINGS
41
TECHNICAL CHART
42
RECOMMENDED SPARE PARTS
43
TROUBLE-SHOOTING CHART
45
PRODUCT WARRANTY
48
INSTALLATION FORM FOR WARRANTY APPROVAL
49
DECLARATION OF CONFORMITY
50
DATE OF THE LAST UPDATE 30/09/2016