Eureka E50 - 1° Servicing and Maintenance for Scheduled Servicing; 2° Servicing and Maintenance for Scheduled Servicing

To Next Page

To Previous Page

3°

SERVICING AND MAINTENANCE FOR SCHEDULED SERVICING

AFTER 300 HOURS

DATE

DAY

MONTH

YEAR

WORKING HOURS

 Check that the batteries clamps are not loosen or oxidized

 Check the cover gasket

 Make sure there are no loose screws or bolts

 Make sure the squeegee gas spring is not damaged and that it is working properly

 Check and clean the recovery tank drain valve

 Check the vacuum motor float filte

 Check the drainpipe of the recovery and solution tank

 Make sure the squeegee vacuum pipe is not broken or blocked

 Check and if necessary rotate or replace the squeegee blades

 Check and eventually clean the cooling grid of the vacuum motor

 Check the adjusting/closing detergent solution tap

 Check the solenoid valve (if present)

 Make sure all machine functions are operating correctly

THE SCHEDULED SERVICING WAS CARRIED OUT BY:

NAME:_______________________________________________

SURNAME:___________________________________________

SIGNATURE:______________________________________________

___________________________________

DISTRIBUTOR’S STAMP

NOTE:

4°