Eureka E50 - Recommended Spare Parts Used for Servicing

44
RECOMMENDED SPARE PARTS USED FOR SERVICING. SERVICING OPERATIONS
CAN BE CARRIED OUT BY THE USER HIMSELF ON CONDITON IT HAS PREVIOUSLY
BEEN INSTRUCTED BY EITHER THE MACHINE OWNER OR HIS EMPLOYER
 COD. 330142: BUMPER DISC
 COD. 340104: LID GASKET MT. 1,95
 COD. 360463: SQUEEGEE FRONT RUBBER IN LYNATEX (STANDARD)
 COD. 360464: SQUEEGEE REAR RUBBER IN LYNATEX (STANDARD)
 COD. 360465: SQUEEGEE FRONT RUBBER IN POLYURETHANE (OIL-RESISTANT)
 COD. 360466: : SQUEEGEE REAR RUBBER POLYURETHANE (OIL- RESISTANT)
 COD. 440059: WHEEL DIAM.50X24
 COD. 490593: COMPLETE SPLASH GUARD E50-M500
 COD. 490594: COMPLETE SPLASH GUARD E55-M550
 COD. 520084: DISC LOCK
 COD. 520111: LOAD BRUSH FLANGE
 COD. 520126: 0,9 PPL BRUSH (E50-M500)
 COD. 520127: 0,6 PPL BRUSH (E50-M500)
 COD. 520128: PAD WITH DISC LOCK (E50-M500)
 COD. 520129: 0,9 PPL BRUSH (E55-M550)
 COD. 520130: 0,6 PPL BRUSH (E55-M550)
 COD. 520131: PAD WITH DISC LOCK (E55-M550)
 COD. 520135: 1,2 TYNEX BRUSH (E55-M550)
 COD. 520136: 1,2 TYNEX BRUSH (E50-M500)
 COD. TE.25160: RED ABRASIVE DISC DA 21” 530 mm (E55-M550)
 COD. TE.27606: BLACK ABRASIVE DISC DA 19” 480 mm (E50-M500)
 COD. TE.30167: BLUE ABRASIVE DISC DA 21” 530 mm (E55-M550)
 COD. TE.51422: BLACK ABRASIVE DISC DA 21” 530 mm (E55-M550)
 COD. TE.69208: WHITE ABRASIVE DISC DA 21” 530 mm (E55-M550)
 COD. TE.76132: RED ABRASIVE DISC DA 19” 480mm (E50-M500)
 COD. TE.76474: WHITE ABRASIVE DISC DA 19” 480mm (E50-M500)
 COD. TE.79543: BLUE ABRASIVE DISC DA 19” 480 mm (E50-M500)