Eventide ARGUS 5000 - Page 195

HEADING SOURCE
VALID STATE
-HOW
HEADING REF.
0 DEGREES
PAGE LINE CHG RTN
HEADING SOURCE, like the ADF SELECT page,
should be set to conform to the technical characteristics
of the heading information supplied by the slaved
compass or HSI.
REMOTE SWITCHES
should be selected to "Y" only if the appropriate switch
is wired to the Argus.
REMOTE SWITCHES
■N SELECT
N INFORMATION
PAGE
LINE
CHG
RTN
REMOTE SWITCH END
July 1999 Argus 5000/7000 Ver. 5.xx Reference Manual Part#141003 191