GENERAL FEATURES OF THE UPS UNIT
The SINLINE RT / SINLINE RT XL units are LINE-INTERACTIVE (VI) class units
designed to work with equipment supplied from ~ 230 VAC single-phase electric
power mains. They provide energy for practically any device whose power rating is
not greater than the UPS unit’s power rating.
Alongside their excellent performance and reliability, the SINLINE RT / SINLINE RT
XL range of UPS units offer a number of other advantages:
The universal rack / tower housing, thanks to which the UPS orientation can be
changed quickly. The LCD's rack / tower mode selection is done via software.
Network interface as a default feature (supports SNMPv1 and HTTP) - for
remote management of the UPS unit through SNMPv1 protocol (compatible with
RFC1628) or a website browser.
HID USB communication interface - the UPS can operate with other devices
without the necessity to install software
Firmware that can be updated by the user - as soon as the new version is
available, the user can enjoy its new functionalities.
CDS System (Clear Digital Sinus) - generates a clear sine wave in the unit's
output (in battery mode)
AVR, a system for regulating (increasing and decreasing) the mains voltage - for
adapting incorrect input voltage to a level that is acceptable to the receivers,
without the use of the battery
The LCD display grants the user complete control over the UPS.
The unit's battery charging system with thermal compensation additionally
protects the built-in batteries, prolongs their life and consequently leads to
reduced maintenance costs.
Back-up time prediction - for determining the UPS autonomous operation (in
back-up mode) in real time.
The start-on-battery function allows to start the UPS even if there is no power in
the mains (so-called "cold start").
The battery can be replaced by the user.
To Next Page
Loading...
