Eversys Enigma Classic E'2ct - Special Safety Instructions and Signs

For Your Safety 1
5700109748 | V01-09/2021 15/ 132
1.7 Special safety instructions and signs
Appropriate safety instructions are mentioned in the specific chapters. They should be observed in the
same way as the general safety instructions contained in this chapter.
1.7.1 Signs
The following signs can be found on the Enigma. Associated warnings are explained in the table.
Sign Description Explanation
Caution, consult
accompanying
documents
-
High voltage - Danger
ELECTROCUTION
During maintenance work, always power off
the machine using the main switch (see
“5.9”
on page 63
).
Burning - Danger
H
OT SURFACE
Contact may cause burns. Do not touch.
Corrosive product
CORROSIVE
Causes severe burns.
Avoid contact with skin and eyes.
Main switch Power ON.
Main switch Power OFF.
Main water inlet Water tap open (See
“2.2.2” on page 20).
Main water inlet Water tap closed.
Protective earthing
-
1
0