Eversys Enigma Classic E'2ct - Steam Purge Button

Operation 5
5700109748 | V01-09/2021 59/ 132
5.6.5 Steam purge button
To Initialise the Enigma, it is necessary to press the blinking purge button after each start-up. Each time
a purge is necessary this button will flash.
After every use of the steam wand it is necessary to wipe and purge it.
A. Press the blinking purge button on the main screen (1).
B. Wipe the steam wand with a damp cloth (2). Change cloths every day.
C. On the screen that displays, press purge (3).
Caution hot steam!
Fig. 5-8
1
3
2