EasyManua.ls Logo

Eversys Enigma Classic E'2ct - Commissioning and Operation; Initial Machine Setup and Requirements

Eversys Enigma Classic E'2ct
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5700109748 | V01-09/2021 51/ 132
Commissioning 4
Chapter Overview
This chapter outlines the initial setup of the machine.
4.1 Initial commissioning
It is imperative to read the “1.4 General safety instructions” on page 11 and understand this
manual before commissioning the machine.
Specifications for the electrical connection and the standards quoted apply for connecting
the coffee machine in EU countries. It may be necessary to also observe additional country-
specific regulations. Outside the EU, acceptance of the standards quoted is to be checked by
the legal entity or person who wishes to use the coffee machine.
The machine weighs > 50 kg, two people are required to unpack, transport and/or lift it onto
a flat stable table capable of bearing its weight.
If using a forklift, hand stacker or any other manual lifting equipment, make sure to use it
according to local regulations.
Your service organisation will put your coffee machine in operation for the first time and instruct you
on its operation.
Subsequent recommissioning, decommissioning or any service and repair operations will also be
undertaken by your service organisation.

Table of Contents

Related product manuals