5 Operation
64/ 132 Enigma User Manual | © Eversys S.A.
5.11 Emergency stop
To shut down all functions, either:
• switch OFF at the main power switch (3).
• unplug the power cord from the mains socket.
Perform an emergency stop ONLY if the machine is completely stalled and does not respond to
any command.
The Enigma must be located in such a manner that the main switch and power cord are accessible at
all times.
The mains power socket must be located near the Enigma and must be easily accessible by the
operator.
Fig. 5-13Emergency stop
To Next Page
Loading...
