DreamCatcher Replay SystemDream Catcher
Revision 1.13 Page 3
2. INSTALLATION
2.1. UNPACKING
Carefully remove the equipment from the boxes and check against the Packing List supplied with each
unit. This shows what items have been shipped against your order and includes all options. Any error
should be reported to your supplier immediately. After you have unpacked the equipment please save all
the packing material as this could be useful in the future if the unit needs to be returned for maintenance.
Check each item supplied for transit damage. Any damage should be reported in detail to your supplier.
You must state the serial number of the unit (to be found on the rear or side of each unit).
2.1.1. Equipment shipped with every DreamCatcher Server
1. 1x DreamCatcher Server
2. 1x 22” Slide Rail
3. 1x Slide Rail Mounting
4. 1x Display Port to DVI Adapter
5. 2x 10G Copper Twin AX Ethernet Cable
6. 9x DIN to BNC Cables
7. 2x Power Cables
8. 1x RS422/LTC D25 Break Out Cable
2.1.2. Equipment shipped with every DreamCatcher Controller
1. 1x DreamCatcher Controller
2. 1x Power Cables
2.2. POWER CONSUMPTION
DreamCatcher‟s power consumption maximum is 1500W with an average draw of 750W. DreamCatcher
controller‟s power consumption is 65W.
To Next Page