DreamCatcher Replay System
Page 24 Revision 1.13
Figure 3-8: Network Interfaces Menu
Configure the eth1 IP address (Eth B on rear of controller). This is the Controller IP associated with
the Ethernet 1 Network. Ensure you save the setting.
Exit out of the DC-RCP10.
3.1.3. DreamCatcher Controller System Configuration
Enter DreamCatcher‟s Settings menu.
Enter the IP Address of Server menu.
Figure 3-9: DreamCatcher Server IP Menu
Set Dreamcatcher‟s Server IP to the corresponding Eth 0 IP of the server for this Controller and save.
Exit the IP Address of Server Menu and enter the Keyboard and Mouse Control menu
To Next Page
Loading...