evertz DreamCatcher - Operating Video Standard and Capture Bit Rate

DreamCatcher Replay System
Page 36 Revision 1.13
3.4.1.3. Clearing Record Trains and Content from DreamCatcher’s Controller
 Follow the instructions in section 3.3.3 to access DreamCatcher‟s Server Menu.
 Next enter the Clear Data Menu.
 Choose one of the two clear options depending on what type of clear is required.
 To clear the record trains without clearing any clipped content choose the Clear Record Trains item
and confirm the clear.
 To clear the record trains and all clipped content choose the Clear DreamCatcher Data and Record
Trains item and confirm the clear.
 DreamCatcher will take approximately 30 seconds to clear all content.
3.4.2. Operating Video Standard and Capture Bit Rate

IMPORTANT: Changing Video Standard, Bit Rate or Input/Output Configuration
settings will require a clear of all DreamCatcher content and record trains including
all clipped content.
3.4.2.1. Setting Video Standard with the Web Configuration
 Follow the instructions in section 3.3.1 to access the Web Configuration.
 Scroll down to DreamCatcher‟s Configuration section and select the “Configure Your DreamCatcher”
button.