DreamCatcher Replay SystemDream Catcher
Revision 1.13 Page 29
Click on the Systems Menu tab at the bottom right of the system options menu.
At the top of the Systems Menu you should see a DreamCatcher Panel system, click on this item.
Once in the Panel menu, enter the corresponding DreamCatcher Controller IP for the current
DreamCatcher Server.
Make sure to click save before exiting the menu.
At this time the Controller buttons should light up.
Enter DreamCatcher‟s system menu as shown in Figure 3-14 and set a unique “Username”, scroll
down to the bottom of the menu and click save before exiting the menu.
Your DreamCatcher Server and Panel are now configured, press ESC on the keyboard to exit Edit
Mode.
IMPORTANT: Ensure that each DreamCatcher Server has a unique Username. Having
duplicate Usernames on DreamCatcher’s network will cause control issues
To Next Page
Loading...