DreamCatcher Replay System
Page 44 Revision 1.13
IMPORTANT: The Main User will have the permissions to use the Montage outputs.
That is why the remote user’s montage availability is is absent.
Once configured, the main user will need to load a layout. If you load „DUAL DISPLAY 4x4‟, you‟ll
need to go to outputs 3 and 4, edit the settings so that the REMOTE USER is the user controlling
them, and edit them so that they see output 3 and output 4. UMD‟s attached to outputs will need to be
edited. The screen on the controller will be empty at this point. From here you will need to add a clip
view widget.
To Next Page