Raptor User Manual
2017 EverySight Ltd. Proprietary Page 36 of 46 Rev 1.0
Using and Configuring the Raptor’s Camera
1. Using the Camera is a simple process and can be done at any stage before, during or
after your ride.
a. To activate your camera at any time, double tap on the touchpad.
b. You will know that the camera is active when the framing area appears in
your field of view.
c. Swipe forward to take a picture
d. To record a video – when the camera is active, Swipe Backwards.
i. The video camera will record for 60 seconds
ii. If you wish to stop recording before the 60 seconds, Swipe
Backwards again
e. To exit the camera, Swipe Down
2. You can also use the camera at any time by using voice control. To activate the Voice
Commands, simply say: “Go Everysight’’.
Once active, either say "Take a Picture" or "Record a Video" in order to take a picture
or record a video.
a. If you wish to stop recording a video, you will need to Swipe Backwards on
the touchpad
The Everysight app on your phone allows you to control how video is cropped, and the
video recording quality.
1. Using the Everysight app on your phone, tap the Menu icon
(three horizontal lines on the bottom left of the screen), and
tap Settings.
1.1. If you are using an iPhone, go to Camera Settings
1.2. If you are using an Android phone, you will need to take
the additional step of tapping the Video tab.
2. For Video Cropping, choose Road to have the cropped from the
bottom, or Off Road to have it cropped from the top.
3. For Video Recording Quality, choose between 480p/30fps,
720p/60fps or 1080p/30fps.
4. For Photo Quality, choose either Normal (recommended for
capturing pictures in motion) or Full 13.2 MP (Great for
capturing images while stationary)
To Next Page
Loading...