Raptor User Manual
2017 EverySight Ltd. Proprietary Page 21 of 46 Rev 1.0
A display can also contain the "smart arc" used for navigation rides and workouts. You can
choose for each screen separately if you wish to show or hide the smart arc.
Each screen can be defined as either an upper or lower layout, displaying the primary
display field on top or bottom of the display. We highly recommend that you'll set up at least
one screen of both upper and lower layouts, to see which layout best suits you.
To customize the information and statistics displayed during your ride, follow these steps.
• Go to http://go.Everysight.com
• Sign-in using the same credentials used for the Everysight app on your smartphone.
• Hover the cursor over your name.
• On the drop down menu, Click Screens.
• On the side of the screen you'll see all available screens. Click one of them to modify
it.
• To change a data field – simply click on it and select the data type and value from the
drop down list, or choose Empty.
• You can add up to 6 screens, and you can delete screens you don’t want anymore.
• You can reorder the screens by dragging and dropping them into position.
• Click the Smart Arc to display or hide it.
• You can choose to have the data displayed high or low on the screen. The default is
high.
• Changes will be saved automatically
Just Ride
One of the most popular features of Raptor is the simplicity of being able to "Just Ride"
while still being able to track all the information without taking your eyes off the road.
The information displayed is being transferred from your smartphone, Raptor's sensors and
external sensors that can be paired with Raptor. To learn more about how to pair your
sensors to Raptor, please refer to chapter …. in this manual.
All information is being displayed on up to 6 customizable screens that can be easily
accessed during the course of your ride. To learn more about the screens configuration,
please refer to chapter …. in this manual.
Maps can be displayed during the course of your ride, and might require that you load
Raptor with regional maps. To learn more about loading maps (and also about the
navigation ride), please refer to chapter …. in this manual.
Please note: Before going on a ride, make sure that your Raptor is fully charged. It should
take about 2 hours to fully charge when the battery is depleted. To learn more about
charging Raptor, please refer to chapter …. in this manual.
To Next Page
Loading...