Raptor User Manual
2017 EverySight Ltd. Proprietary Page 5 of 46 Rev 1.0
If at any time you witness a device being charged starting to balloon, swell up, smoke or heat
up, discontinue the charging process immediately, disconnect the device and observe it in a safe
place for approximately 15 minutes. Contact manufacturer for service instructions.
Don't leave the device near a fire or heat source or high temperature location; never dispose
of in a fire or incinerator.
Don’t leave, charge or use the device in any space where the temperature may exceed 60º C/
140º F.
Don't immerse in or spray the device with water.
Don't pierce the device with any sharp object.
Don't strike with heavy objects or drop the device on any hard surface.
Don't attempt to disassemble or modify the device or charger.
Don't put the device into a microwave or conventional oven, dryer, or high-pressure container.
Stop using the device if it becomes abnormally hot, discolored, or deformed, or if you detect
abnormal conditions during use, charging, or storage.
MAGNETS
This device contains magnetic materials which might affect the operation of implantable medical
devices and therefore should be kept at a distance from persons with any medical device
implants in their body. Please contact your physician for further information on how using this
device might affect the operation of your implant.
To Next Page
Loading...