202
POWERHEAD
POWERHEAD REMOVAL
POWERHEAD REMOVAL
Remove lower motor covers. Lower Cover
Removal on p. 82.
Disconnect power trim connectors and exhaust
water valve electrical connector (60, 65).
Disconnect cooling water hoses from exhaust
housing.
Remove pin and washer from shift rod lever to
release the lower shift rod.
WARNING
Protect against hazardous fuel spray.
Before starting any fuel system service,
carefully relieve fuel system pressure.
Refer to Relieving Fuel System Pressure.
To prevent accidental starting while ser-
vicing, disconnect the battery cables at
the battery.
1. Connectors 005200
1
1. Overboard indicator hose
2. Drain hose
004298
1. Shift rod screw 002171
1
2
1
To Next Page
Loading...
